2006–2009 Dodge Ram 1500, 2500 & 3500 3rd Gen Bulb Size Guide
Looking for the correct bulb sizes for a third-generation Dodge Ram? This guide covers the replaceable exterior and interior lighting used on 2006–2008 Dodge Ram 1500 and 2006–2009 Dodge Ram 2500 and 3500 trucks, including headlights, fog lights, turn signals, brake lights, reverse lights, cargo lights, interior lights and license-plate lights.
We also cover LED headlight and fog-light upgrades, CANbus requirements and actual LED light output to help you choose the correct lighting for your 3rd Gen Ram.
3rd Generation
3rd Generation
3rd Generation
Headlight: H13 / 9008
Fog Light: 9006
Front Turn / Running Light: 3157
Tail / Brake Light: 3057
Cargo / Third Brake Light: 912
License Plate: 168
Shop 3rd Gen Dodge Ram LED Bulbs
2006–2009 3rd Gen Dodge Ram Bulb Size Chart
Use the chart below as a quick reference for the major lighting positions on the third-generation Ram trucks covered by this guide.
| Light Location | Bulb Size | Notes | LED Upgrade |
|---|---|---|---|
| Headlight High / Low | H13 / 9008 | One dual-beam bulb per headlight | Shop H13 / 9008 |
| Fog Light | 9006 | If equipped | Shop 9006 |
| Front Turn / Running Light | 3157 | Factory specification may be listed as 3157NAK | Shop Ram LEDs |
| Tail / Brake Light | 3057 | Factory tail / stop position | Shop Ram LEDs |
| Reverse / Backup Light | 3057 | Factory tail-light assemblies; verify aftermarket housings | Shop Ram LEDs |
| Cargo Light | 912 | Factory cargo-light position | Shop Ram LEDs |
| Third Brake Light / CHMSL | 912 | Factory CHMSL position | Shop Ram LEDs |
| License Plate Light | 168 | 194-compatible LED replacements are commonly used | Shop Ram LEDs |
2006–2009 3rd Gen Dodge Ram Headlight Bulb Size
The third-generation Dodge Ram trucks covered by this guide use an H13 / 9008 headlight bulb.
The H13/9008 is a dual-beam bulb, meaning the same bulb provides both low- and high-beam operation. Each headlight housing uses one H13/9008 bulb, so replacing both headlights requires one pair.
Low Beam: H13 / 9008
High Beam: H13 / 9008
Bulbs Required: One per headlight / two per truck
LED Headlight Upgrade & CANbus Decoders
When upgrading the H13/9008 headlights on these third-generation Dodge Ram trucks to LED, the truck's factory electrical system needs to be considered along with the bulb itself.
For the FUZED LED H13/9008 headlight setup used on these trucks, CANbus decoders are required. The decoders work with the LED headlight conversion and help the lighting system operate correctly with the Ram's factory electronics.
For that reason, we recommend selecting the complete H13/9008 LED headlight setup with the appropriate decoders rather than ordering the headlight bulbs alone for this application.
LED headlight and fog-light upgrades for the third-generation Dodge Ram.
Shop H13/9008 LED Headlights + Decoders View All 3rd Gen Ram LEDs
3rd Gen Dodge Ram LED Light Output & Beam Pattern
LED headlight performance is about more than simply producing more light. The position of the LED chips inside the factory headlight housing also affects how the headlight projects light onto the road.
A properly installed LED headlight should work with the factory housing to produce useful forward lighting rather than simply creating uncontrolled glare.
LED headlight output and beam pattern on a third-generation Dodge Ram.
After installing new headlight bulbs, check the beam pattern and headlight aim before driving at night. Proper aim helps put usable light where it belongs and prevents the headlights from being aimed unnecessarily high.
2006–2009 3rd Gen Dodge Ram Fog Light Bulb Size
The factory fog-light bulb size for the third-generation Dodge Ram trucks covered by this guide is 9006.
If your truck is equipped with factory fog lights, replacing the original halogen bulbs with LED bulbs can provide a whiter appearance that better matches upgraded LED headlights.
Location: Factory front fog lights
Quantity: Two bulbs
Front Turn Signal & Running Light Bulb Size
The front turn-signal / running-light position uses a 3157-family bulb. Factory documentation may identify the original bulb more specifically as 3157NAK.
When replacing turn-signal bulbs with LEDs, keep in mind that LED turn signals can change the electrical load seen by the vehicle. The correct LED setup must account for turn-signal operation and potential hyperflash.
Tail & Brake Light Bulb Size
The factory rear tail / stop-light position uses a 3057 bulb on the third-generation Ram configuration covered by this guide.
3rd Gen Dodge Ram Reverse Light Bulb Size
Factory third-generation Ram tail-light assemblies covered by this guide use a 3057 bulb in the backup-light position.
Upgrading the reverse lights to LED can provide a whiter light behind the truck when backing up. This can be especially useful when reversing at night or in areas with limited ambient lighting.
LED reverse-light output on a third-generation Dodge Ram.
Cargo & Third Brake Light Bulb Size
The factory cargo-light and center high-mounted stop-light positions are listed with a 912 bulb on the third-generation Ram configuration covered by this guide.
When shopping for an LED replacement, pay attention to the actual application rather than only the physical base. The cargo lights require white output, while the third brake-light position must provide the appropriate stop-light color through the factory lens.
3rd Gen Dodge Ram Interior Light Bulbs
Interior lighting can vary by cab configuration and equipment level. The original third-generation Ram documentation lists different interior lamp types depending on position, so we recommend confirming the original bulb before ordering interior LEDs.
| Interior Position | Factory Bulb Reference | Recommendation |
|---|---|---|
| Overhead Console / Map Lighting | TS 212-2 | Verify original bulb before ordering |
| Dome Lighting | 7679 | Verify original bulb before ordering |
Cab configuration, overhead console equipment and previous interior modifications can affect what is currently installed in an older truck. Checking the existing bulb is the safest approach before replacing interior lighting.
3rd Gen Dodge Ram License Plate Bulb Size
The factory license-plate bulb is listed as 168. The 168 uses the common T10-style wedge base, and compatible 194-style LED replacements are commonly used for this application.
Compatible LED Family: 168 / 194 / T10-style replacement
Complete 2006–2009 3rd Gen Dodge Ram Bulb Reference
The complete reference below applies to 2006–2008 Ram 1500 and 2006–2009 Ram 2500/3500 trucks using the third-generation body and applicable factory lighting assemblies.
| Lighting Position | 2006–2008 Ram 1500 | 2006–2009 Ram 2500/3500 |
|---|---|---|
| Headlight High / Low | H13 / 9008 | H13 / 9008 |
| Fog Light | 9006 | 9006 |
| Front Turn / Running | 3157 / 3157NAK | 3157 / 3157NAK |
| Tail / Brake | 3057 | 3057 |
| Reverse / Backup | 3057 | 3057 |
| Cargo Light | 912 | 912 |
| Third Brake / CHMSL | 912 | 912 |
| License Plate | 168 | 168 |
2006–2009 3rd Gen Dodge Ram Bulb Size FAQ
What years does this 3rd Gen Dodge Ram bulb guide cover?
This guide covers 2006–2008 Dodge Ram 1500 trucks and 2006–2009 Dodge Ram 2500 and 3500 trucks using the third-generation body style.
Does this guide fit a 2009 Dodge Ram 1500?
No. The 2009 Ram 1500 was redesigned and is not included in this third-generation guide. The 2009 fitment information on this page applies to third-generation Ram 2500 and 3500 trucks.
What headlight bulb does a 2006–2009 3rd Gen Dodge Ram use?
The third-generation Ram trucks covered by this guide use an H13/9008 dual-beam headlight bulb. The same bulb provides both low- and high-beam operation.
Are H13 and 9008 the same bulb?
H13 and 9008 are commonly used designations for the same headlight bulb type. You may see the bulb listed as H13, 9008 or H13/9008.
Do I need CANbus decoders for LED headlights on my 3rd Gen Ram?
For the FUZED LED H13/9008 conversion used on these trucks, the appropriate CANbus decoders are required. We recommend using the complete LED headlight and decoder setup for this application.
What fog-light bulb does a 3rd Gen Dodge Ram use?
Trucks equipped with the applicable factory fog lights use a 9006 fog-light bulb.
What front turn-signal bulb does a 3rd Gen Ram use?
The factory front park / turn-signal position uses a 3157-family bulb, with factory documentation identifying the original lamp as 3157NAK.
What brake-light bulb does a 2006–2009 3rd Gen Dodge Ram use?
The factory tail / stop-light position uses a 3057 bulb on the trucks covered by this guide.
What reverse-light bulb does a 3rd Gen Dodge Ram use?
Factory tail-light assemblies on the trucks covered by this guide use a 3057 bulb in the backup-light position. If your truck has aftermarket tail lights, verify the installed bulb before ordering because aftermarket housings may use a different size.
What license-plate bulb does a 3rd Gen Dodge Ram use?
The factory specification is a 168 bulb. Compatible 194/T10-style LED replacements can be used where designed for the same wedge-base application.
Shop LED Bulbs for Your 3rd Gen Dodge Ram
Whether you're upgrading the H13/9008 headlights, 9006 fog lights, reverse lights or other lighting on your third-generation Ram, verify that your truck falls within the vehicle range covered by this guide before ordering.
This guide covers: 2006–2008 Ram 1500 and 2006–2009 Ram 2500/3500 third-generation trucks.
This guide does not cover: the redesigned 2009 Ram 1500.
Shop All 3rd Gen Ram LED Bulbs
Confirm your truck's year, model and factory lighting configuration. If your Ram has aftermarket headlight or tail-light assemblies, check the bulb currently installed because aftermarket housings may use different bulb sizes.