Install Guides
For any Installation questions refer to the guides below or contact us at: 865-314-6122
For any LED headlight or Fog light bulb you install:
Install with the LED chips aimed horizontally. (Left and Right)
The wire on the fan base should be upwards or downwards after installing.
Our bulbs are designed with an adjustable collar so that you are able to align
them properly when installing.
H11, 9005, 9145, 9006, H7, H8 and H9
When installing these FUZED LED Headlight bulb sizes
if they do not come on turn the connector around
180 degrees (the opposite way) and plug back in.
They can be plugged in backwards causing them to not work.
if they do not come on turn the connector around
180 degrees (the opposite way) and plug back in.
They can be plugged in backwards causing them to not work.
9007/9004 F1 Series/PLUS Series
H7, H1, H3 and 9003/H4 F1 Series
1. Remove Bulb Base Ring
2. Install Bulb Base Ring into Headlight Housing
3. Ensure That the Bulb Base Ring is Locked in and Secured into
the Headlight Housing
4. Install LED Bulb into Bulb Base Ring and Headlight Housing
2. Install Bulb Base Ring into Headlight Housing
3. Ensure That the Bulb Base Ring is Locked in and Secured into
the Headlight Housing
4. Install LED Bulb into Bulb Base Ring and Headlight Housing
FUZED LED REVERSE BULBS
GSXR H7 and H7 LED Adapter
1. Remove Bulb Base Ring
2. Install Bulb Base Ring into Headlight Housing with the LED Adapter
Behind the Bulb Base Ring
3. Secure the Locking Wire/Spring Around the Bulb Base Ring AND LED Adapter
4. Push the LED Bulb back into the Bulb Base Ring and Headlight Housing
5. Run the LED Bulb Wire and Connector through the Round Rubber Headlight
Grommet/Cover
6. Secure the Rubber Headlight Grommet/Cover Back onto Headlight Housing
(Make sure nothing is against the LED Fan causing it not to spin)
7. Connect LED Bulb Connector into Bulb Connector
8. The LED Bulb can be Plugged in Backwards. If it does not come on Unplug
and Turn the Plug around and Plug back in